What are the precautions for daily operation and maintenance of Biomass Pellet Hot Air Furnace?
Publish Time: 2024-10-30
As an efficient and environmentally friendly heating equipment, Biomass Pellet Hot Air Furnace needs to pay attention to the following points in daily operation and maintenance to ensure that it provides hot air stably, safely and continuously:First, the fuel selection of Biomass Pellet Hot Air Furnace is crucial. Pure wood pellet fuel that meets the requirements should be selected to ensure high calorific value, low ash content, and not easy to coke. When adding materials, impurities such as iron parts should be prevented from entering the material box to avoid damage to the equipment.Secondly, the daily operation of the hot air furnace requires close attention to its working status. The working conditions of each motor should be checked regularly. If there is any abnormality, it should be stopped and checked immediately. At the same time, pay attention to whether there is dust accumulation in the furnace and heat exchange tubes, and clean them in time to avoid affecting the heat exchange efficiency. During operation, key components such as the circulation fan of the hot air furnace should be ensured to operate normally, and dry burning of the hot air furnace is strictly prohibited.In terms of maintenance, Biomass Pellet Hot Air Furnace needs regular maintenance. This includes cleaning the combustion chamber, heat exchanger and various air ducts to prevent the accumulation of ash and residue, which will affect the combustion efficiency and heat exchange efficiency of the hot air furnace. At the same time, the main oxygen and supplementary oxygen fans should be checked for normal operation to ensure that there is sufficient oxygen required for combustion. In addition, it is necessary to check whether the cold air outlet of the hot air furnace is blocked by debris and whether the refractory materials in the furnace are worn, and replace and repair them if necessary.Finally, the Biomass Pellet Hot Air Furnace should be powered off in time after each shutdown, and ensure that there is no residual fuel in the silo and furnace. Cleaning and maintenance work can only be carried out after the equipment cools down. Before the drying season begins, the circuit should also be checked to see if it is intact to avoid safety accidents such as short circuits and leakage.In summary, the daily operation and maintenance of the Biomass Pellet Hot Air Furnace cannot be ignored. Only by strictly following the operating procedures can its long-term stable operation be ensured, providing strong support for the production and operation of the enterprise.
